View RCL175PQ43_8848855.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

rcl175 series ? 175 w with 12 cfm cooling ? 200 w peak capability ? up to 120 w convection-cooled ? low leakage current ? industrial, it & medical approvals ? level b conducted emissions ? class i & ii operation ? en61000-3-2, -3 compliant ? 4 mechanical options ? flexible design for modified standards ? universal ac input ? single, dual, triple & quad outputs ? mating connector & cable harnesses available approved for class i and class ii applications, xp powers rcl range of single and multiple output ac-dc, 175 w power supplies features the world's smallest footprint for units of these ratings. the open frame version measures just 5.5" long x 3.71" wide (140 mm x 94.1 mm) and 1.28" (34.6 mm) high. these high-density power supplies meet en55022 level b conducted emissions with maximum leakage currents of 120 a at 115 vac or 200 a at 230 vac. as a result, these switchers are equally suitable for industrial, it and medical applications, with no price premium for meeting medical requirements. the rcl175 series has single output versions from 3.3 v to 48 v dc, adjustable by 10%, and dual, triple and quad output versio ns covering combinations of 3.3 v, 5 v, 12 v, 15 v and 24 v. they are dual-fused for compliance with iec60601-1 and efficiency is 80-90%, depending upon the model, so minimal excess heat is generated. the power supplies deliver full power between -10 c and +50 c and will operate at up to +70 c with derating and require only 12 cfm of cooling for full power operation, with up to 120 w possible when convection-cooled. comprehensive overvoltage, overload and short circuit protection is built in. covers, cable harnesses and connector kits are available.
general specifications xppower.com 2 input characteristics characteristic minimum typical maximum units notes & conditions input voltage - operating 90 (1) 264 vac 120-370 vdc input frequency 47 50/60 63 hz power factor 0.9 230 vac input current - no load 100 ma 230 vac input current - full load 2.1 a 115 vac inrush current 35 a 230 vac earth leakage current 120/200 a 115/230 vac (50 hz) input protection t3.15 a/250 v internal fuse in both line and neutral characteristic minimum typical maximum units notes & conditions reliability and service life mean time between failure 385 khrs mil-hdbk-217f @ 25 oc isolation input to output test voltage 4000 vac test duration: 1 min input to ground test voltage 1500 vac test duration: 1 min output to ground test voltage 1500 500 vac test duration: 1 min (open frame) (1) test duration: 1 min (u channel & covered) other specifications switching frequency: pfc 75 khz switching frequency: pwm 60 khz weight 1.1 (500) 2.0 (900) lb (g) depending on mechanical configuration output characteristics characteristic minimum typical maximum units notes & conditions output voltage see models and ratings table initial set accuracy 2 % output voltage adjustment 10 % v1 (via pot), outputs 2-4 track by same % minimum load 1.5 a v1 of multi-output models, 100 ma on auxiliaries start up delay 2 s start up rise time 100 ms hold up time 20 ms nominal low line & maximum power drift 0.2 % line regulation 0.5 % 90-264 vac load regulation v1 & v2: 3 v3 & v4: 5 of nominal % pq43 models v1: 1 v2, v3 & v4: 5 of nominal % all other models transient response 4 % deviation with a 25% load change at 1 a/s. recovery within 1% in <500 s ripple & noise 50 200 mv 20 mhz bandwidth dependent on output voltage overvoltage protection 115 140 % short circuit protection single output models: constant current limit. multi-output models: foldbback current limit. temperature coefficient 0.02 %/?c note: 1. minimum input voltage is 85 vac but output power must be derated to 95%. note: 1. unit to be mounted on plastic spacers. 2. all specifications are at nominal input and full resistive load at +25 oc, unless otherwise stated.
xppower.com 3 environmental characteristic minimum typical maximum units notes & conditions operating temperature -10 +70 oc see derating curves storage temperature -20 +85 oc cooling 12 cfm for 175 w of output power humidity 95 %rh non-condensing operating altitude 3000 m shock 30 g peak half sine 6 axes vibration 2 g 5 hz to 500 hz, 3 axes electromagnetic compatibility - emissions electromagnetic compatibility - immunity phenomenon standard test level criteria notes & conditions esd en61000-4-2 3 a eft en61000-4-4 3 a radiated field en61000-4-3 10 v/m a surges en61000-4-5 3 a conducted en61000-4-6 10 v/m a dips and interruptions en61000-4-11 70% ut a for 10 ms 40% ut b for 100 ms phenomenon standard test level criteria notes & conditions conducted en55022/11 class b radiated en55022/11 class a voltage flicker en61000-3-3 safety agency approvals efficiency unit type typical units notes & conditions rcl175ps24 89.0 % 230 vac input, full load (see curves) RCL175PQ43 83.0 % 230 vac input, full load (see curves) safety agency safety standard category cb report certificate # us/16253/ul iec60950-1:2005 ed 2 information technology ul ul file #e139109-a62-ul ul60950-1 (2007), csa 22.2 no.60950-1-07 ed 2 information technology tuv tuv certificate # b06 11 57396 020, en60950-1:2004 information technology ce lvd safety agency safety standard category cb report certificate #us/18340/ul, iec60601-1 ed 3 including risk management medical ul ul file # e146893, ansi/aami es 60601-1:2005 & csa c22.2 no. 60601-1:08 medical tuv tuv en60601-1:2006 medical equipment protection class safety standard notes & conditions class i & class ii iec60950-1:2005 ed 2 & iec60601-1 ed 3 see safety agency conditions of acceptability for details means of protection category primary to secondary 2 x mopp class i operation, 1 x mopp class ii operation, contact sales for 2 x mopp (means of patient protection) iec60601-1 ed 3 secondary to earth 1 x mopp (means of patient protection)
xppower.com 4 models and ratings notes: 1. peak rating can be taken for 5 seconds in every minute. 2. there is a user-accessible fan supply rated at 12 v at 350 ma (not available on fan-cooled units). 3. for operation at 85 vac output power is derated to 95%. 4. op1 10 a max convection-cooled. 5. 20 a max from output 1 and 2 combined convection-cooled. 6. a minimum load of 100 ma is required on output 2, 3 and 4 to maintain the regulation figures. 7. 12 cfm airflow required for maximum power. 8. outputs 3 & 4 are floating. they can be connected externally for positive or negative output. thermal derating curve -10 0 10 20 30 40 50 60 70 20 40 60 80 100 0 ambient temp (?c) load (%) options ? for the u-channel version, add suffix ?-u? to the model number. ? for the u-channel version with cover kit, add suffix ?-c? to the model number. ? for the u-channel version with fan cover kit, add suffix ?-f? to the model number. ? for screw terminals (output connector p2 only), contact sales. ? for versions with remote enable, contact sales. ? for foldback current limit on single output models, contact sales. ? for constant current limit (output 1 & 2) on multi output models, contact sales. total power output 1 output 2 (6) output 3 (6,8) output 4 (6,8) model number max (7) peak conv. (4,5) v min max peak (1) v min max peak (1) v min max v min max 175 w 204 w 120 w 12.0 v 0.0 a 14.5 a 17.0 a rcl175ps12 175 w 195 w 120 w 15.0 v 0.0 a 11.6 a 13.0 a rcl175ps15 175 w 200 w 120 w 24.0 v 0.0 a 7.2 a 8.3 a rcl175ps24 175 w 200 w 120 w 28.0 v 0.0 a 6.2 a 7.1 a rcl175ps28 175 w 202 w 120 w 48.0 v 0.0 a 3.6 a 4.2 a rcl175ps48 175 w 200 w 110 w 5.0 v 1.5 a 15.0 a - 12.0 v 0.1 a 6.3 a 8.4 a f 12 v 0.1 a 2.0 a rcl175pt31 (4,6) 175 w 200 w 110 w 5.0 v 1.5 a 15.0 a - 15.0 v 0.1 a 4.6 a 6.6 a f 15 v 0.1 a 2.0 a rcl175pt32 (4,6) 175 w 200 w 90 w 5.0 v 1.5 a 15.0 a - 3.3 v 0.1 a 15.0 a - f 15 v 0.1 a 2.0 a f 15 v 0.0 a 2.0 a RCL175PQ43 (5,6) 175 w 200 w 90 w 5.0 v 1.5 a 15.0 a - 12.0 v 0.1 a 5.5 a 7.6 a f 5 v 0.1 a 2.0 a f 12 v 0.0 a 2.0 a rcl175pq44 (6) 175 w 200 w 90 w 5.0 v 1.5 a 15.0 a - 15.0 v 0.1 a 4.0 a 6.0 a f 5 v 0.1 a 2.0 a f 15 v 0.0 a 2.0 a rcl175pq45 (4,6) 175 w 200 w 90 w 5.0 v 1.5 a 15.0 a - 24.0 v 0.1 a 3.2 a 5.0 a f 12 v 0.1 a 2.0 a f 12 v 0.0 a 2.0 a rcl175pq46 (4,6) 175 w 200 w 90 w 5.0 v 1.5 a 15.0 a - 24.0 v 0.1 a 3.0 a 5.0 a f 15 v 0.1 a 2.0 a f 15 v 0.0 a 2.0 a rcl175pq47 (4,6)
remote sense xppower.com 5 p3 load p2 pins 1-3 positive power supply pins 4-9 negative pin 2 +sense pin 3 -sense power fail pin 4 p3 pin 3 p3 330 r power supply pins 4-9 p2 transistor on (0.8 v) transistor off (4.5 v) 5 v external supply remote on/off power supply unit on pin 1 p3 pins 4-9 p2 unit off power supply pin 1 p3 pins 4-9 p2 power supply unit off pin 1 p3 pins 4-9 p2 unit on power supply pin 1 p3 pins 4-9 p2 v1 only, compensates for 0.5 vdc or 10%, whichever is lower. open collector output refers to 0v sense. when using the power fail signal, -sense must be connected to op1 & 2 return (0v). connect pin 1 (p3) to 0v to disable unit. -e unit
xppower.com 6 transient response rcl175ps12 25% load change RCL175PQ43 o/p 1 25% load change
xppower.com 7 efficiency against input voltage 78% 79% 80% 81% 82% 83% 84% 85% 86% 0 50 100 150 200 250 300 input voltage efficiency rcl175ps12 175 w load 0 50 100 150 200 250 300 input voltage efficiency 77% 78% 79% 80% 81% 82% 83% rcl175pq42 175 w load efficiency against output load output load (w) efficiency 0 20 40 60 80 100 120 140 160 180 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% rcl175ps12 @ 230 vac input output load (w) efficiency 0 20 40 60 80 100 120 140 160 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% RCL175PQ43 @ 230 vac input
xppower.com 8 start up time rcl175ps12 230 vac 100% load RCL175PQ43 115 vac full load rcl175ps12 100% load 115 vac input hold up time
xppower.com 9 output noise & ripple rcl175ps12 with 175 w load. noise measured is 50 mv pk-pk RCL175PQ43 o/p 1 with 75 w load. noise measured is 34 mv pk-pk RCL175PQ43 o/p 2 with 50 w load. noise measured is 24 mv pk-pk RCL175PQ43 o/p 3 with 24 w load. noise measured is 30 mv pk-pk RCL175PQ43 o/p 4 with 24 w load. noise measured is 36 mv pk-pk
xppower.com 10 conducted noise
xppower.com 11 mechanical details open frame weight: 1.10 lbs (500 g) approx. u-channel weight: 1.54 lbs (700 g) approx. all dimensions are in inches (mm) tolerance 0.02 (0.5) 5.50 (139.7) 3.70 (93.9) 5.23 (132.7) 0.22 (5.5) ? 0.14 (3.5) mounting hole (4 positions) pin 16 pin 1 earth/safety ground tag (class i operation) 1.28 (32.4) 0.10 (2.5) pin 1 pin 6 voltage adj. 3.26 (82.9) p1 p2 3 1 p3 0.47 (12.0) 2.95 (75.0) 0.55 (14.1) 0.89 (22.5) 3.94 (100.0) 4.60 (116.8) 3.35 (85.0) 1.50 (38.1) 1.60 (40.8) 0.74 (18.7) 1.18 (30.0) 2.50 (63.5) 5.71 (145.0) 3.26 (82.8) 3.90 (99.0) 5.23 (132.7) 0.24 (6.2) pin 1 pin 16 earth/safety ground tag p2 ? 0.14 (3.5) mounting hole (4 positions) m3 mounting hole (in 2 positions each side) 8-32 unc mounting hole (in 2 positions each side) 8-32 unc mounting hole (in 4 positions) m3 mounting hole (in 4 positions) p1 3 1 note: 1. suitable for class i operation only. 2. mounting screws must not penetrate by more than 0.12? (3.0 mm) max note: 1. suitable for class i and class ii operation, for class ii applications contact sales. 2. overall height: 1.36 (34.6)
xppower.com 12 mechanical details 3.26 (82.9) 3.90 (99.0) 0.24 (6.1) 5.23 (132.7) 5.71 (145.0) 1.18 (30.0) 3.35 (85.0) 1.60 (40.8) 0.74 (1.87) 1.59 (40.4) 2.50 (63.5) 0.47 (12.0) 2.95 (75.0) 0.55 (14.1) 0.89 (22.5) 3.94 (100.0) 4.60 (116.8) pin 16 pin 1 earth/safety ground tag p2 ? 0.14 (3.5) mounting hole (4 positions) m3 mounting hole (in 2 positions each side) m3 mounting hole (in 4 positions) 8-32 unc mounting hole (in 2 positions each side) 8-32 unc mounting hole (in 4 positions) p1 3 1 1.18 (30.0) 1.60 (40.8) 2.50 (63.5) 1.57 (40.0) 0.74 (18.7) 3.35 (85.0) 2.14 (54.4) 2.95 (75.0) 0.47 (12.0) 0.55 (14.1) 0.89 (22.5) 3.94 (100.0) 4.60 (116.8) 3.26 (82.9) 0.24 (6.1) 3.90 (99.0) 5.23 (132.7) 5.71 (145.0) pin 1 pin 16 earth/safety ground tag p2 ? 0.14 (3.5) mounting hole (4 positions) m3 mounting hole (in 2 positions each side) m3 mounting hole (in 4 positions) 8-32 unc mounting hole (in 2 positions each side) 8-32 unc mounting hole (in 4 positions) p1 3 1 u-channel & cover weight: 1.76 lbs (800 g) approx. all dimensions are in inches (mm) note: 1. suitable for class i operation only. 2. mounting screws must not penetrate by more than 0.12? (3.0 mm) max note: 1. suitable for class i operation only. 2. mounting screws must not penetrate by more than 0.12? (3.0 mm) max u-channel & fan cover weight: 1.98 lbs (900 g) approx.
xppower.com pin connectors connector info input connector - p1 pin function 1 live 2 n/c 3 neutral output connector - p2 pin function 1 +output 1 2 +output 1 3 +output 1 4 0 v 5 0 v 6 0 v 7 0 v 8 0 v 9 0 v 10 +output 2 11 +output 2 12 +output 2 13 -output 3 14 +output 3 15 -output 4 16 +output 4 signals connector - p3 pin function 1 remote on/off 2 +sense 3 -sense 4 pf signal 5 0 v fan supply 6 +12 v fan supply installation instructions for class ii operation the open frame power supply components are for building-in class i or class ii. they will be considered class ii (double/reinforced insulation) only when mounted above chassis (accessible metal parts) on ins ulating posts and provide minimum of 8mm creepage and 5 mm clearance distance. class ii units have no reliance upon protective earthing. in all o ther cases the units will be considered class i. p3 is a 6-way 0.1" pitch square pin header molex housing 22-01-2065 pins 08-50-0032 (30-22 awg) for mating connectors, use pinouts as details in this datasheet. may not match manufacturers mold marks as connector. for all formats, output connector p2 as follows: single output models: 6-way 0.156" pitch square pin header molex housing 09-91-0600 or equivalent pins 08-50-0106 (24-18 awg) 08-50-0108 (28-22 awg) dual output models: 12-way 0.156" pitch square pin header (except model pd22 which has a 14-way connector) molex housing 09-91-1200 or equivalent pins 08-50-0106 (24-18 awg) 08-50-0108 (28-22 awg) triple output models: 14-way 0.156" pitch square pin header molex housing 09-91-1400 or equivalent pins 08-50-0106 (24-18 awg) 08-50-0108 (28-22 awg) quad output models: 16-way 0.156" pitch square pin header molex housing 09-91-1600 or equivalent pins 08-50-0106 (24-18 awg) 08-50-0108 (28-22 awg) 18-mar-14

▲Up To Search▲

Price & Availability of RCL175PQ43

	To Download RCL175PQ43 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .